Check if Button Pressed Again Game Maker

Users experience the error message 1053 which states 'The service did not respond to the start or control request in a timely fashion'. This error message is the cause of a timeout that occurs after a request was initiated to starting time a service only it did non reply in the time window.

Error 1053: The Service did non Respond to the Start or Control Request in a Timely Mode

There are numerous variations of the error bulletin ranging from issues in Windows services to custom services not being able to launch (including games and other third-party software). Nosotros also came across instances where Developers faced this problem when they were developing their custom software. Here in this article, we volition become through all the variations of the error message and discuss what could be done to solve the problem once and for all.

What causes Error 1053 in Windows?

Later receiving initial reports from users, nosotros started our investigation and took a deep look at all the modules involved in the mechanics of starting as service. After gathering all the results and syncing them with user responses, nosotros concluded that the consequence occurred due to several different reasons. Some of them are listed beneath:

• Timeout settings: Windows, by default, has a timeout setting which if non met by applications, forces them to abort and close. If the service which you lot are trying to launch takes much longer to respond, and then it volition be killed. Here, we tin modify the timeout setting by manipulating the registry.
• Missing DLL file: Some other instance of the error occurs when you take a missing DLL file on your computer which is used by numerous other applications as well. If this DLL file is in disharmonize or isn't present at all, you will feel the error message.
• Corrupt/missing system files: Another instance of why this issue occurs is considering there are decadent or missing system files on your computer. If the very installation of Windows is non proper and has issues, you lot will experience numerous problems including the error message nether discussion.
• Outdated Windows: Microsoft officially recognized this mistake message on their official website and fifty-fifty released a temporary hotfix to solve the problem. However, recently they removed the hotfix and instructed users to upgrade to the latest iteration of Windows.
• Using a Release build (for Developers): If you are trying to launch services in a Debug build of Windows, you are likely to experience this error bulletin. Debug builds are not stable and don't have all the functionality running every bit compared to release builds.
• Missing Frameworks (for Developers): Incompatibility of Frameworks are as well responsible for causing the fault message. The box on which yous are trying to run the service and your service itself must be on the same framework.
• An issue in DB service (for Developers): Another instance where you lot might experience this error bulletin is where there is a problem with your configuration of the projection. The server details should correct so the service doesn't have problem accessing.
• Decadent installation: Another common instance where you lot might experience this mistake bulletin is where the installation of your application (which is prompting the service) is somewhat corrupt. Reinstalling helps here.
• Bad network configurations: Services communicate with your network all the time. If your network configurations are not adept, the services might not be able to perform their tasks and hence crusade the error message under discussion.
• Administrator admission: The service which you are trying to launch (or a tertiary-party is trying to launch) should be launched as an administrator if it is consuming system resources not meant for normal utilize.

Before we move on with the solutions, make sure that yous are logged in as an administrator on your figurer and have an active internet connexion. Besides, follow the solution from the first and work your manner down accordingly.

Repair Decadent Files

Download and run Restoro to browse and restore decadent and missing files fromhither. Once done, continue with the solutions beneath.

Solution 1: Changing Timeout Settings through Registry

The very first affair which we should endeavour is changing the timeout settings of your services through your registry editor. Whenever a service is requested to launch, a timer is started with a predefined value. If the service doesn't start inside this fourth dimension frame, the error message comes forward reporting and so. Hither in this solution, we volition navigate to your computer's registry and change the value.  If it isn't nowadays, nosotros will create a new key for information technology.

1. Press Windows + R, type "regedit" in the dialogue box and press Enter.
2. Once in the registry editor, navigate to the following file path:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Command\

3. At present, search for the cardinal of 'ServicesPipeTimeout'. If you lot notice information technology already there, y'all can move to directly edit. Still, if y'all don't find the entry, select Control, right-click on whatsoever space present at the right side of the screen and select New > DWORD

   

   Creating a new Registry Key

4. Proper name the key as 'ServicesPipeTimeout' and fix the value as 180000 (You tin also right-click the value and click Change if the option to gear up the value didn't come in your case.

   

   Irresolute 'ServicesPipeTimeout' value

5. Save changes and exit. Restart your computer completely and and then try launching the service. Check if the consequence is resolved.

Solution two: Checking for Organisation File Corruptions

Another thing to attempt before we move on to more technical and advanced methods is checking whether the system has whatever corruption or not. If your very Windows is missing files and is somehow corrupt, information technology may crusade some important modules not to work. As a upshot, you volition experience the error message 1053. In this solution, we volition apply Window's system file checker which checks all your system file structure and compares the construction with that of a fresh re-create nowadays online. If there is whatsoever discrepancy, the files volition be replaced appropriately.

1. Printing Windows + S, type "command prompt" in the dialogue box, right-click on the application and select Run equally administrator.
2. Once in an elevated command prompt, execute the post-obit commands one past one and make sure that they complete:

sfc /scannow  DISM /Online /Cleanup-Epitome /RestoreHealth

Checking system files for corruptions

3. The latter command fixes whatsoever problems which the organisation file checker diagnoses when running the scan. Restart your estimator completely afterwards running the commands and check if the issue is resolved for good.

Solution 3: Reinstalling the application (if applicative)

Another useful method to eradicate the error message 1053 is reinstalling the application which is requesting the service. Commonly, third-party applications installed from an exterior source (excluding Microsoft Store) might have missing or outdated components that are requesting for some service in Windows.

Hither, what you lot tin do is navigating to the official website and downloading a fresh version of the awarding. Afterwards uninstalling the current version, you can install it. Here is the method on how to uninstall an application in Windows.

1. Press Windows + R, type "appwiz.cpl" in the dialogue box and press Enter.
2. One time in the awarding manager, search for the application, correct-click on it and select Uninstall.

   

   Uninstalling the Application

3. Restart your computer and and then proceed with the reinstallation process.

Solution 4: Resetting Network Cache and Configurations

If y'all are using a service that connects to the internet and gets some piece of work done over there, it is recommended that you check whether all your sockets and other network configurations are intact and non causing any issues. If they are, your service might not be able to connect to the internet to carry out its tasks and hence cause difficulties.

In this solution, nosotros will navigate to the command prompt every bit an administrator and reset the network configurations from there. If successful, the error message will exist eradicated.

Note: This will erase all the custom settings which you take fix manually.

1. Press Windows + R, type "command prompt" in the dialogue box, correct-click on the application and select "Run as administrator".
2. Once in an elevated command prompt, execute the post-obit commands one by i:

netsh winsock reset  ipconfig /renew

Resetting Network Configurations

3. Afterward resetting your network, make sure that you have internet access past checking through your browser and see if the event is resolved.

Solution 5: Getting Ownership of the Application

Another rare case that we came across was non having the ownership of the application caused the application not to execute the service properly. This makes sense as if the application doesn't accept enough elevated access, it volition not exist able to send/read the response to/from a service (particularly if it is a system service). In this article, we will navigate to the executable of the awarding and so change the ownership to our username. If successful, this will solve the trouble of getting the mistake 1053.

1. Locate the file/binder of the application. Correct-click and select Properties.

2. Navigate to the "Security" tab and click on "Avant-garde" present at the well-nigh bottom of the screen as you can see in the image below.

   

   Advanced Security Settings

3. Click on the "Change" button present in the preceding screen. Information technology will be right in front of the owner's value. Here we will change the possessor of this folder from the default value to your computer account.

   

   Changing Owner of application

4. Now enter your user business relationship name in the space nowadays and click on "Bank check Names". Windows will automatically list all the accounts which are a hit against this name.

   

   Checking for Feasible Names

If you lot tin can't find your account proper noun using this method, you can try selecting it manually from the listing of user groups bachelor. Click on "Advanced" and when the new window comes forth, click on "Discover Now". A list volition be populated at the bottom of the screen consisting of all the user groups on your calculator. Select your account and press "OK". When y'all are back at the smaller window, printing "OK" once more.

Browsing possible owner names

5. Now check the line "Replace possessor on sub containers and objects". This will ensure that all the folders/files inside the folder besides change their ownership. This way you lot won't have to proceed with all the processes once more and over again for any sub-directories present. In addition to this, nosotros also recommend that you enable the option "Supervene upon all child object permission entries with inheritable permission entries from this object".
6. Now close the Backdrop window later on clicking "Utilize" and open it again afterward. Navigate to the security tab and click "Avant-garde".
7. On the permissions window, click on "Add" present at the near bottom of the screen.

   

   Adder user account to elevated status

8. Click on "Select principle". A similar window will pop upwards like information technology did in footstep iv. Repeat step 4 when it does. Now check all the permission (giving full control) and press "OK".
9. Check the line "Replace all kid object permission entries with inheritable permission entries from this object" and printing Employ.
10. Shut the files and restart your figurer completely. Now, try launching the application and bank check if the issue is resolved for skillful.

Solution 6: Updating Windows to the Latest Build

Another thing to attempt is checking whether you have the updated version of Windows installed on your reckoner or not. Microsoft release updates to target new changes in the OS and to support additional features as well. Some updates are 'critical' in nature and must exist installed every bit soon as possible. If any of these 'critical' updates are not installed, you will feel issues.

1. Press Windows + S to launch the search bar, write Update in the dialogue box and open the Update settings.

   

   Checking for updates

2. Once in the update settings, click on Check for updates. The reckoner will now connect to Microsoft servers and run into if at that place is any update available. If there are any updates already highlighted, perform them immediately.

Bonus: Tips for Developers

If y'all are a developer and are trying to launch a service in Windows, there are hundreds of technicalities that y'all should exist doing accurate to spawn and become a response from service. Here in this bonus solution, we will list some of the about popular causes of Error 1053 in the developing world and their solutions.

• Making sure .Net Frameworks are in sync: If the application/service which you are trying to launch is on another Framework than that of the hosting car, yous will experience problems. Make sure that the frameworks are in sync.
• Using Release Build: Developers normally tend to utilise the Debug build to test various services and their operations. Nonetheless, it was noted that non running the service in Release build crusade several problems.
• To debug the startup of your service (to get more insight), insert the lawmaking listed below on the elevation of the OnStart() method of your service:

while(!System.Diagnostics.Debugger.IsAttached) Thread.Sleep(100);

What this will do is stall the service so you can chop-chop attach the Visual Studio debugger through Debug > Attack

• Copy the release DLL or get the DLL file from release mode rather than Debug style and paste it inside the installation folder. This will solve any issues if related to the DLL file.
• Make sure that the database which your service/awarding is accessing is properly configured. If there are any problems with the database itself (or any other credentials), you will experience the mistake message. A good practice is to check all the modules once over again and make sure all the parameters and variables are properly set.

Kevin is a dynamic and self-motivated information engineering professional, with a Thorough knowledge of all facets pertaining to network infrastructure design, implementation and administration. Superior record of delivering simultaneous large-scale mission critical projects on time and nether upkeep.

johnsonuppose.blogspot.com

Source: https://appuals.com/how-to-fix-error-1053-the-service-did-not-respond-to-the-start-or-control-request-in-a-timely-fashion/

Share this post